The Meeting-House Described

A meeting-house is usually the dominant feature of any marae complex. It is a large rectangular building with a gabled roof and a front veranda, often, but certainly not always, marked by embellishments of carving, curvilinear rafter patterns (koowhaiwhai) painted in black, red and white with lattice-work panels (tukutuku) on the wall. Houses range in length from approximately 12 or 13 metres to nearly 30 metres. Both the size and the degree of ornamentation of a house say something about the mana (prestige) of its owner group. In myths there is evidence to be found that the size of a meeting-house adds to the prestige of the ones who built it (Salmond 1975:36). The size of a house also varies with the magnitude of the owner group. The house of a whaanau (extended family) will be smaller than the house serving a hapuu (sub-tribe). The other feature to be mentioned is the degree of decoration, particularly carvings, and here, too, prestige is at stake. However, it is important to point out that not all meeting-houses are necessarily carved. Only in some areas, particularly the east coast of the North Island, are most meeting-houses carved, whereas in the Waikato area where I did my fieldwork, for example, carved meeting-houses are extremely rare. Carving only came into fashion from the mid-nineteenth century on, and in that period of history, after the wars and confiscations of vast areas of land, few tribes had the means, let alone the morale, to become artistic.

Generally a meeting-house is built of modern materials. The foundations are embedded in concrete, the walls are made of weatherboarded timber and the roof is covered with sheets of corrugated iron. The front of the house is extended in the form of a porch or maahau up to 4 metres deep. When a meeting-house is richly embellished, this intermediate veranda, linking the marae proper with the interior of the house, is decorated the most with intricate carvings. An outstanding figure (tekoteko) is normally carved at the apex of the meeting-house. Some wood surfaces may be carved into ancestors or motifs derived from mythology, such as the infamous taniwha ((sea-)demons). The veranda rafters may be painted with the curvilinear koowhaiwhai patterns in white and black, and in some areas mixed with red. The doorway is to the right of centre,[1] with the name of the house and often also the date on which it was formally opened, marked on a small panel fixed above it. Not infrequently the only window is in the front wall and to the left of centre. Along the walls of the veranda one might find wooden benches to accommodate visitors during hui, community gatherings for any purpose.

Inside the meeting-house old portraits of ancestors hang on the walls. Often the rafters rising from each side-panel to the ridge-pole are painted with koowhaiwhai designs, and under the roof there may be lattice-work panels between the rafters. The ridge-pole is supported by one or two freestanding heart-posts (the poutokomanawa), which, contrary to what Salmond reports (1975:37), are rarely carved into human figures, as, according to one informant of chiefly descent — an elderly woman of the Ngaati Porau tribe — Maori people do not recognize chiefs. ‘This backbone of the house is not carved, because we don’t recognize chiefs. We all carry the canoe together.’

In some houses there is a platform at the rear. The floor is usually covered with flax mats (whariki) or a carpet. Mattresses are stored against the walls or in a separate shed, and they are rolled out if the house is in use during hui. Visitors who stay the night in a meeting-house are provided with clean sheets and pillows.




[1] Throughout this paper when I refer to locations on the right-hand and left-hand side of the meeting house, I am positioned inside the building facing towards the front wall.